USES:

Finishes
For the rapid removal of all floor finishes and waxes from resilient flooring, including:  vinyl, vinyl asbestos, vinyl composition, asphalt, linoleum and rubber tiles.  Also ideal for finished non-resilient such as terrazzo, marble, ceramic, quarry tile, concrete and poured epoxy flooring.  Although excellent for any type of equipment, greatest savings are realized when using automatic scrubbing equipment.

Applications
Greatest savings are realized when using an automatic scrubber, but can be used with other scrubbing machines or mops.

Features

• Technically Advanced Professional Grade Stripper
• No Rinsing Necessary
• Low Foaming
• Removes All Sealers
• Time Saving
• Does Not Require Scrubbing Machine
• Proprietary 55% Active

Benefits

• Easily Removes Multi – Layers of Burnished Floor Finish
• Industries Fastest Working Liquefier
• Does Not Contain Caustic Soda
• Low Foaming Allows Use of Auto Scrubber
• No Rinse Saves Time by Eliminating Neutralizing
• Reduces Equipment Costs
• Unlike Butyl Stripper It Has a Slow Evaporation Rate
• Low Odor

DIRECTIONS FOR USE:

Mop/Wet Vacuum Stripping System

Dilute Super Stripper according to dilution rates (with mildly warm water if available).  Apply liberally with a mop or automatic scrubber to an area small enough so as not to allow the product to dry. Allow dwelling for 3 to 5 minutes.  Agitate with a rotary floor machine or automatic scrubber equipped with stripping pads (change pads often or as needed). No flood rinsing is required. Vacuum floors with a wet vacuum and extract all solution and residue. Allow floor to dry completely. If a complete strip was not accomplished (all traces of sealer or wax must be removed including corners, door jambs, etc.) repeat above procedure. When the floor is properly prepared, apply new finish as per manufacturer’s directions.   

Dilution Rates and Specifications

For complete stripping of floors: Dilute 4:1 (1 gallon stripper per 5 gallon mixture, with warm water if available). 5 gallon mixture will strip approximately 1,000 square feet of flooring.

Product Characteristics

Note:
As some asphalt tiles may be damaged by prolonged soaking in concentrated strippers, a spot test is recommended before general use.

Dilution Rates and Spefications
Dilute 4:1 (1 gallon stripper per 5 gallon mixture) with warm water. 5 gallon mixture
will strip approximately 1,000 square feet of flooring.